2024

Scheduled Connections – Update

1 Comment / GB3OA, WiresX / By

Thanks all for your patience! We’re pleased to report some progress on the previously reported issue on scheduled connections. Some changes have been made, not sure which one did the trick, or maybe it’s a combination, but scheduled connections are now available again.

An updated version of the software became available so that’s been installed, plus we’ve switched VPN providers and also implemented a VLAN at the site of the repeater.

In addition, we’ve resurrected the GB3OA room and bridged it to the YSF reflector 11704 (GB-SW-LANCS)

So, here’s the current connections schedule:

  • From 7am until 9am every day, GB3OA will be connected to the North West Fusion Group room, 44422 to cover the Squirrel net.
  • At all other times, it will be connected to its own room, now called GB-SW-LANCS (05239). This Wires-X room is also RF bridged to the YSF reflector (also called GB-SW-LANCS), the number of which is 11704.

Please note – The repeater can be disconnected at any time and connected to wherever you like. After thirty minutes of inactivity, the repeater will reconnect to either NWFG or GB-SW-LANCS depending on the time of day.

The operating pages on this website will be updated accordingly in due course.

The GB3OA team.

Scheduled Connections – Update Read More »

Some technical issues – Removal of scheduled connections.

4 Comments / GB3OA, WiresX / By

For the latest update on this issue, click here.

Maybe it’s the PC we run Wires-X on, maybe it’s Wires-X itself. Possibly it’s the auto-connect scheduler that runs in the background.

Either way, over recent weeks we’ve seen multiple hiccups in the way Wires-X performs (or rather doesn’t), specifically that it keeps crashing taking the PC with it. The scheduler is only installed to facilitate the connection to NWFG a couple of times a day. The logs also show, that while the repeater is connected to NWFG, there is little to no local activity on GB3OA

As a result, and in an effort to try and get to the bottom of the problem, the scheduler has been un-installed meaning that there will no longer be any automatic connections made.

So, we’re back to *very* basic operation! Wires-X of course remains enabled.

Regards, the GB3OA team.

Some technical issues – Removal of scheduled connections. Read More »

Back to basics…..

5 Comments / GB3OA / By

After several months of operation, looking at the logs it’s clear to see the repeater is getting very little use. Maybe with all the additional ways of linking that were provided, it’s all got a little too complicated. So….

Changes have been made with the result that GB3OA is now a simple FM / C4FM repeater with no additional ways of linking (Wires-X of course still exists). It’s not normally connected anywhere, but does have its own room (Southport-UK). So, feel free to use it to suit your own needs. Hopefully this way we may get a little more activity!

The SW-LANCS YSF Reflector and XLX704 XLX reflector are no more.

73, The GB3OA team.

Back to basics….. Read More »